Netis ST3105GS#
Switch ST3105GS provides 5 10/100/1000Mbps Auto-Negotiation RJ45 ports. All ports support Auto MDI/MDIX function, eliminating the need for crossover cables or Uplink ports. This Switch provides you with a low-cost, easy-to-use, high-performance, seamless and standard upgrade to improve your old network to a 1000Mbps network. It will boost your network performance with up to 2000Mbps full duplex data transfer speed.
Main features:#
- 5 10/100/1000Mbps RJ45 ports, Auto-Negotiation & Auto MDI/MDIX
- IEEE 802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode
- 10Gbps switching fabric capacity/backplane bandwidth
- Support 9216-byte jumbo packet length forwarding at wired speed
- Supports 2K MAC address table, MAC address auto-learning & auto-aging
- Green Ethernet technology for effective power saving
- LED indicators for simple diagnostics and management
- Plug and play ,no configuration required
Techical Specification
| Interface |
5* 10/100/1000M TX ports |
| LED |
PWR, LAN1-LAN5 |
| Power Supply |
DC 9V/500mA (Output) |
| Dimensions (L x W x H ) |
130 x 70 x 26 mm |
| Cabling Type |
10Base-T: UTP Cat.3 or up
100Base-TX: UTP Cat.5 or up
1000Base-TX: UTP Cat.5 or up |
| Standard |
IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE802.3ab 1000Base-T |
| Access Method |
CSMA/CD |
| Transmission Method |
Store and Forward |
| Switch Architecture |
Non-blocking |
| Data Transmission Rate |
10/100Mbps(Half-duplex)
20/200/2000Mbps(Full-duplex) |
| MAC Address Table |
2K |
| Certification |
FCC, CE |
| Environment Operating Temperature: |
0°C~40°C |
| Storage Temperature: |
-40°C~70°C |
| Operating Humidity: |
10%~90%RH non-condensing |
| Storage Humidity: |
5%~90%RH non-condensing |
| Package |
1* ST3105GS
1* 9V/500mA Power Adapter
1* Quick Installation Guide |
I agree
Do not show again
out of stock
