The RB711G-5HnD is a small CPE type RouterBOARD 5GHz wireless router with an integrated wireless card. It has two antenna connectors for using in dual chain setups, and a Gigabit Ethernet port - the perfect device for Nv2!
The integrated 5GHz 802.11a/n wireless card is capable of up to 25dBm! It has built in 16kV ESD protection on both the RF and Ethernet ports.
Features :#
- Processor Atheros AR7241 400 MHz
- 32 MB SDRAM and 128MB NAND
- 1 Gigabit Ethernet port
- Power over Ethernet
- System MikroTik RoterOS v4, Level3 license
Feature / Model |
711G-5HnD |
711GA-5HnD |
Wireless chains |
2 |
2 |
USB |
- |
Yes |
License |
L3 CPE |
L4 AP |
RAM |
32MB |
64MB |
Gigabit port |
Yes |
Yes |
Powering |
PoE |
PoE / Jack |
Specification :#
CPU |
Atheros AR7241 400MHz network processor |
Memory |
32 or 64 MB DDR SDRAM onboard memory |
Data storage |
32MB onboard NAND memory chip |
Ethernet |
One Gigabit Ethernet port with Auto-MDI/X |
Wireless |
Built in 5GHz AR9283 802.11a/n card 2 MMCX connectors |
Extras |
Reset switch, Beeper |
LEDs |
Power, NAND activity, 5 user LEDs |
Power options |
PoE: 8-30V DC on Ether1 (Requires RBGPOE PoE injector for Gigabit mode, with regular PoE injector, will work in 10/100 mode) |
Dimensions |
10.5 cm x 10.5 cm (4.13 in x 4.13 in) Weight: 67g |
Power consumption |
Up to 4.5W at 18V full load (0.245A) |
Operating System |
MikroTik RouterOS, Level3 or Level4 license |
RX sensitivity |
802.11a: –92 dBm @ 6Mbps to -76 dBm @ 54 Mbps 802.11n: –92 dBm @ MCS0 to –73 dBm @ MCS7 40MHz |
TX power (2 chains) |
802.11a: 25dBm @ 6Mbps to 22dBm @ 54 Mbps 802.11n: 25dBm @ MCS0 to 18dBm @ MCS7 |
Modulations |
OFDM: BPSK, QPSK, 16 QAM, 64QAM DSSS: DBPSK, DQPSK, CCK |