SXT LTE6 kit (RBSXTR&R11e-LTE6)

The SXT LTE6 kit is a device for remote locations that are within cellular network coverage. Due to its advanced LTE chip design and high gain antenna, it can provide connectivity for your building even where cell phones fail.
The new SXT LTE6 features a CAT6 LTE modem, which enables carrier aggregation and allows the device to use multiple bands at the same time. A huge advantage when there are a lot of LTE users in the area. It provides better responsiveness in a crowded environment and higher efficiency for weaker signal situations in the countryside. We have seen Internet speed doubling in rural areas after switching to CAT6, so there is no need to wait for cable network expansions.

The unit is equipped with two Ethernet ports (the second port has PoE-out functionality), so you can use it to power up another device. It also has two Micro SIM slots for backup link. Unit is shipped with a 24 V power supply, but can support full range 18-57 V and is 802.3af/at compliant.

Specifcation:#

CPU	QCA9531 650 MHz
Memory	RAM 64 MB Flash 16MB
Ethernet	2x 10/100
LTE antenna gain	9 dBi
Antenna beam width	60°
LTE category	6 (300 Mbps downlink, 50 Mbps uplink)
3G category	R7 (21 Mbps downlinks, 5.76 Mbps uplink) R8 (42.2 Mbps downlink, 5.76 Mbps uplink)
2G category	Class12
SIM slot	2 (Mini SIM)
PoE in	Yes, on Ether1
PoE out	On Ether2, max out per port output (input < 30 V): 600 mA max out per port output (input > 30 V): 400 mA, max total out (A): 600 mA
Dimensions	140 x 140 x 103 mm
Supported input voltage	18 - 57 V (Passive PoE, 802.3af/at on Ether2)
Operating temperature	-40°C .. +60°C
Operating System	RouterOS, level 3
Max Power consumption	6W
Supported bands	LTE (FDD) bands: 1(2100)/2(1900)/3(1800)/5(850)/7(2600)/8(900)/12(700)/17(700)/20(800)/25(1900)/26(850) LTE (TDD) bands: 38(2600)/39(1900)/40(2300)/41n(2500) 3G bands 1(2100)/2(1900)/5(850)/8(900) 2G bands 2(1900)/3(1800)/5(850)/8(900)